Check out Superbike Store for the best racing deals you can find!

Author Topic: Rattle at 5-6000 rpm???  (Read 28091 times)

theQ

  • Full Member
  • ***
  • Posts: 126
  • Karma: +8/-0
Re: Rattle at 5-6000 rpm???
« Reply #30 on: October 27, 2007, 05:54:52 PM »
I've only pt about 15 miles on her on the street
everything else is around my block

I alternate between the ninja and the RR, i correct my mistakes on the ninja and test it out with the RR.
I'm also practicing on the MSF exercises on the ninja and then RR. and of those 15miles i've only let her rip maybe 3 times within my capabilities

HMONEY23

  • Sr. Member
  • ****
  • Posts: 307
  • Karma: +12/-1
Re: Rattle at 5-6000 rpm???
« Reply #31 on: October 28, 2007, 09:51:52 PM »
nice nice. enjoy it man. my bike is taunting my crippled ass in my garage...
Goofy bastid!  Stay on the bike! 

vfrbh1

  • FREAK Member
  • *****
  • Posts: 1060
  • Karma: +31/-5
Re: Rattle at 5-6000 rpm???
« Reply #32 on: October 29, 2007, 09:02:10 AM »
Don't ride it if you are not going to break it right. You are going to need more than 6000 rpms.  :spank:
for real change support the fairtax act: fairtax.org

Specvpat

  • Sr. Member
  • ****
  • Posts: 447
  • Karma: +4/-1
Re: Rattle at 5-6000 rpm???
« Reply #33 on: October 29, 2007, 02:05:49 PM »
Well the little bit of mileage you're putting it on won't hurt it that bad but i would suggest to find a open road to bring it up to the right rpm threw the gears.

theQ

  • Full Member
  • ***
  • Posts: 126
  • Karma: +8/-0
Re: Rattle at 5-6000 rpm???
« Reply #34 on: November 02, 2007, 12:23:03 AM »
i found my proble....loose ass windscreen

SKIDZZ71

  • FNG
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Rattle at 5-6000 rpm???
« Reply #35 on: February 12, 2008, 05:09:12 PM »
i have the same problem at first i thought it was the plastics and then i got told it was the velocity stacks freezing up so i bought some fuel addtive which did not work ,so i will ask my local dealer cheers peeps  :thumb:

maskale

  • "If loud pipes save lives, imagine what learning to ride correctly could do!"
  • FREAK Member
  • *****
  • Posts: 6024
  • Karma: +202/-48
Re: Rattle at 5-6000 rpm???
« Reply #36 on: February 12, 2008, 05:38:44 PM »
when riding and its buzzing, press on top of your tank a few inches in front of the cap, if it stops that your buzz.
Quote from: DIM
You guys are funny and I will agree this forum has a better knowledge base then .Net

UKTURFROCKS

  • FREAK Member
  • *****
  • Posts: 2885
  • Karma: +52/-31
  • 06 cbr RR
Re: Rattle at 5-6000 rpm???
« Reply #37 on: February 12, 2008, 06:14:35 PM »
i still havent heard a thing outta mine. 
someone tried to steal my katana last year, then they realized it was a katana and stopped, then ran it over with their vehicle..  quote from *~c_dubya~*

icon skull

  • You can't go wrong with a Honda
  • FREAK Member
  • *****
  • Posts: 1294
  • Karma: +21/-6
  • BT forever
Re: Rattle at 5-6000 rpm???
« Reply #38 on: February 12, 2008, 09:06:31 PM »
me either
RED and BLACK

Specvpat

  • Sr. Member
  • ****
  • Posts: 447
  • Karma: +4/-1
Re: Rattle at 5-6000 rpm???
« Reply #39 on: February 13, 2008, 09:29:25 AM »
My brother has a ohlins steering damper, and between 5000-7000rpm it rattles very annoyingly. Especially when you're in traffic.

UKTURFROCKS

  • FREAK Member
  • *****
  • Posts: 2885
  • Karma: +52/-31
  • 06 cbr RR
Re: Rattle at 5-6000 rpm???
« Reply #40 on: February 13, 2008, 10:08:33 AM »
hes got it on wrong. 
someone tried to steal my katana last year, then they realized it was a katana and stopped, then ran it over with their vehicle..  quote from *~c_dubya~*

Specvpat

  • Sr. Member
  • ****
  • Posts: 447
  • Karma: +4/-1
Re: Rattle at 5-6000 rpm???
« Reply #41 on: February 13, 2008, 10:43:58 AM »
hmmM????? I know i took it off a couple of times when i had to take the tank cover off. I doubled check everything, it seemed to be put one rihgt. Looks like theres only way it can go on. The rattling seemes to be coming from the pivot point on the damper itself. What do people usually do wrong when intalling them

Jason748

  • Global Moderator
  • FREAK Member
  • *****
  • Posts: 4120
  • Karma: +128/-10
  • Get'in Faster....
Re: Rattle at 5-6000 rpm???
« Reply #42 on: February 13, 2008, 11:34:58 AM »
I'm guessing it's the linear style Ohlins not the Scotts/Ohlins top mount?

The Ohlins Liner I had on my 748 had a little rattle - Turned out the ball joint piviot was worn out.
CCS/CRA #92
07 CBR600RR - RACE
Sponsors: Two Brothers Honda, Lithium Motorsports, SpyderLeatherworks

"A lot of people go through life doing things badly. Racingís important to men who do it well. When youíre racing, it... itís life. Anything that happens before or after... is just waiting."  -S

Specvpat

  • Sr. Member
  • ****
  • Posts: 447
  • Karma: +4/-1
Re: Rattle at 5-6000 rpm???
« Reply #43 on: February 13, 2008, 12:56:02 PM »
Thats what i was thinking too. If i put my hand on the pivot point it stops the rattling.

07600cbrrr

  • usetorydaharley
  • Full Member
  • ***
  • Posts: 60
  • Karma: +1/-0
Re: Rattle at 5-6000 rpm???
« Reply #44 on: June 04, 2008, 01:36:03 PM »
My 07 does'nt have a rattle but a buzzing sound ,mine was the windshield
07'600rr- LSL sliders,shoei x-11                                                                      Yamaha Rd250,Honda 700 Magna,Yamaha 650 maxim,Busa,Harley Dyna glide