Check out Superbike Store for the best racing deals you can find!

Author Topic: 1/4 mile run.  (Read 3158 times)

oxtar41

  • FREAK Member
  • *****
  • Posts: 957
  • Karma: +24/-37
1/4 mile run.
« on: October 04, 2009, 08:51:18 PM »
http://www.youtube.com/watch?v=rhO-LeUoowg

a vid of my old man playin around on his 06 cbr at the dragstrip. he went 10.85, 126 mph on a stock motored cbr.
"The correct octane is the lowest level you can use without predetonation."

f3racer

  • CBR600RR.com Racer
  • Sr. Member
  • *****
  • Posts: 463
  • Karma: +9/-21
Re: 1/4 mile run.
« Reply #1 on: October 05, 2009, 09:39:07 AM »
thats right at my best time with slip on and PC3. i went 10.89 @124
SSG William Pendleton
US Army Military Police
CCS AM #81
MCRA member
07 CBR 600 RR

oxtar41

  • FREAK Member
  • *****
  • Posts: 957
  • Karma: +24/-37
Re: 1/4 mile run.
« Reply #2 on: October 05, 2009, 09:46:56 AM »
he also has a pc3 and a slip on. no custom map though still pretty dang good for a 600 though.
"The correct octane is the lowest level you can use without predetonation."

f3racer

  • CBR600RR.com Racer
  • Sr. Member
  • *****
  • Posts: 463
  • Karma: +9/-21
Re: 1/4 mile run.
« Reply #3 on: October 05, 2009, 11:50:43 AM »
definately good run.
SSG William Pendleton
US Army Military Police
CCS AM #81
MCRA member
07 CBR 600 RR

SilverRider24

  • FREAK Member
  • *****
  • Posts: 1008
  • Karma: +11/-4
Re: 1/4 mile run.
« Reply #4 on: October 05, 2009, 07:44:10 PM »
Lookin good ox. Tell the old man to keep it safe...ya never know what could happen. :thumb:
What are you living for?

DeadlyRaceReplica

  • FREAK Member
  • *****
  • Posts: 834
  • Karma: +104/-47
Re: 1/4 mile run.
« Reply #5 on: October 05, 2009, 08:11:14 PM »
the bike could probably run a second faster if your skinny ass was on it :P just playin.

oxtar41

  • FREAK Member
  • *****
  • Posts: 957
  • Karma: +24/-37
Re: 1/4 mile run.
« Reply #6 on: October 05, 2009, 10:04:59 PM »
pffft. my old man weighs like 165lbs. im stuck at 192
"The correct octane is the lowest level you can use without predetonation."

DeadlyRaceReplica

  • FREAK Member
  • *****
  • Posts: 834
  • Karma: +104/-47
Re: 1/4 mile run.
« Reply #7 on: October 06, 2009, 09:10:27 PM »
do you have the stock springs in your forks on your race bike?

oxtar41

  • FREAK Member
  • *****
  • Posts: 957
  • Karma: +24/-37
Re: 1/4 mile run.
« Reply #8 on: October 06, 2009, 10:03:53 PM »
nope. its sprung for a 210lb rider with gear on so im right around that in race gear. even if its a little under i like harder suspension anyways. and prob not a big enough differnce to make that much of a change, though i could be wrong?
"The correct octane is the lowest level you can use without predetonation."

blindkiller

  • FREAK Member
  • *****
  • Posts: 898
  • Karma: +25/-20
Re: 1/4 mile run.
« Reply #9 on: October 07, 2009, 09:34:26 PM »
Very nice run best PSI when I ran my stock and the best time I got out of it with just a slip on was 11.1 @ 116 @ 15 PSI.

Did some more modifications to it with:PC3 custom map, mid pipe and slip on, port & polish, and titanium springs and retainers and ran a 10.64 @ 134 @ 14 PSI.

I also had a lot of time to learn my bike a bit more in between and the most I weighed when I was riding was about 140-145 lbs @ 5'7"
:thumb: temper pedic mattresses don't have shit on cinderblocks and cardboard

" To reach manhood, we are all cast into the fire and are purified by pain."

Paulred/black

  • Sr. Member
  • ****
  • Posts: 445
  • Karma: +10/-2
  • 'Nice bike... How fast does it go?' (sigh)
Re: 1/4 mile run.
« Reply #10 on: October 09, 2009, 04:24:21 AM »
waw, im sure my last bike ,bandit600, no fairing. ran like a 13.5 or something. thats terrable compared to the cbr, my god  :thumb:

f3racer

  • CBR600RR.com Racer
  • Sr. Member
  • *****
  • Posts: 463
  • Karma: +9/-21
Re: 1/4 mile run.
« Reply #11 on: October 14, 2009, 09:31:34 AM »
Very nice run best PSI when I ran my stock and the best time I got out of it with just a slip on was 11.1 @ 116 @ 15 PSI.

Did some more modifications to it with:PC3 custom map, mid pipe and slip on, port & polish, and titanium springs and retainers and ran a 10.64 @ 134 @ 14 PSI.

I also had a lot of time to learn my bike a bit more in between and the most I weighed when I was riding was about 140-145 lbs @ 5'7"


just curious what is the PSI ? thats a damn good run too.
SSG William Pendleton
US Army Military Police
CCS AM #81
MCRA member
07 CBR 600 RR

DeadlyRaceReplica

  • FREAK Member
  • *****
  • Posts: 834
  • Karma: +104/-47
Re: 1/4 mile run.
« Reply #12 on: October 14, 2009, 10:32:53 PM »
are you guys talkin forced induction or am I missing something?

NSFW

  • FNG
  • *
  • Posts: 8
  • Karma: +0/-0
Re: 1/4 mile run.
« Reply #13 on: December 11, 2009, 09:55:51 AM »
are you guys talkin forced induction or am I missing something?

lol yeah I thought that too at first. they're talking tyre pressure.