Yoyodyne is your source for Frame Sliders, Slipper Clutches, GPS Lap Timers & Sebimoto bodywork
« previous next »
Pages: [1] 2

Author Topic: rear res delete update  (Read 261 times)

Rjunky

  • FREAK Member
  • *****
  • Posts: 1669
  • Karma: +26/-173
rear res delete update
« on: February 06, 2012, 02:07:56 AM »
i think my tubing is starting to sweat...... wrench how is yours holding up? anybody else had this issue? and does anyone have any ideas or fixes besides...put the original one back on...
Logged
this is my signature.....there are many like it....but this one is mine.....

Wrench87

  • Proud Albertan
  • FREAK Member
  • *****
  • Posts: 1903
  • Karma: +17/-43
    • Facebook
Re: rear res delete update
« Reply #1 on: February 06, 2012, 11:38:43 AM »
Lmao we were just talking about this yesterday! Epic noticed a little splashing on my swing arm after our ride. Looks like the seal on the bottom of the tubing isn't 100%

At least I hope that's all it is


---
I am here: http://maps.google.com/maps?ll=51.115490,-114.066099
Logged

Jason748

  • Global Moderator
  • FREAK Member
  • *****
  • Posts: 3820
  • Karma: +121/-10
  • Get'in Faster....
Re: rear res delete update
« Reply #2 on: February 06, 2012, 01:59:48 PM »
No issues with mine... my 07's been on since I got it in 09...  I also have the same tubing on my front Mastercylinder too, as well as my 748 and my previous 05 race bike.

Do you guys remember which version of the Tygon tubing you bought?  was it the "2275"
Logged
CCS/CRA #92
07 CBR600RR - RACE
Sponsors: Two Brothers Honda, Lithium Motorsports, SpyderLeatherworks

"A lot of people go through life doing things badly. Racing’s important to men who do it well. When you’re racing, it... it’s life. Anything that happens before or after... is just waiting."  -S

Rjunky

  • FREAK Member
  • *****
  • Posts: 1669
  • Karma: +26/-173
Re: rear res delete update
« Reply #3 on: February 06, 2012, 02:00:46 PM »
not sure i got it off of mcmasters or whatever
Logged
this is my signature.....there are many like it....but this one is mine.....

Rjunky

  • FREAK Member
  • *****
  • Posts: 1669
  • Karma: +26/-173
Re: rear res delete update
« Reply #4 on: February 06, 2012, 02:27:41 PM »
i was looking at the original post in .net and i bought what they used the 2075
Logged
this is my signature.....there are many like it....but this one is mine.....

Jason748

  • Global Moderator
  • FREAK Member
  • *****
  • Posts: 3820
  • Karma: +121/-10
  • Get'in Faster....
Re: rear res delete update
« Reply #5 on: February 06, 2012, 04:01:55 PM »
That might be the issue (you're using something recommened over on .net...  ::) )
But the 2075 is the "standard" grade tygon, which isn't the same as the 2275 & 2275 IB.  The 2275 is built to and tested to specific specifications for pharmaceutical and/or biological use.
Here's the specs on it:  http://www.tygon.com/tygon-2000-tubing.aspx

I would only use 2275 or 2275 IB...  Learned this while testing some underwater light fixtures at work a few years ago...  the 2075 sweated after a few months of submersion...
Logged
CCS/CRA #92
07 CBR600RR - RACE
Sponsors: Two Brothers Honda, Lithium Motorsports, SpyderLeatherworks

"A lot of people go through life doing things badly. Racing’s important to men who do it well. When you’re racing, it... it’s life. Anything that happens before or after... is just waiting."  -S

Rjunky

  • FREAK Member
  • *****
  • Posts: 1669
  • Karma: +26/-173
Re: rear res delete update
« Reply #6 on: February 06, 2012, 04:06:00 PM »
you got a link to buy by the foot? every place ive looked sells it by 50ft sections.... only want to buy what i need
Logged
this is my signature.....there are many like it....but this one is mine.....

Jason748

  • Global Moderator
  • FREAK Member
  • *****
  • Posts: 3820
  • Karma: +121/-10
  • Get'in Faster....
Re: rear res delete update
« Reply #7 on: February 06, 2012, 05:28:04 PM »
I've got a source through work...  I'll dig around and see if I have any leftover.

But DesmoTimes sells it by the foot, but LT might have a minium order, and only stocks .25" ID.
http://www.desmotimes.com/product28.htm

KurveyGirl sells 2375 by the ft. - also BEST PLACE TO GET DZUS fastners !!!!
http://kurveygirl.com/shop/product_info.php?cPath=106&products_id=279

McMaster-carr also sells by the foot, but I don't know if they have 2275..., but they might have higher grades (2375 & 2475 I think? - but I don't have any expericence with either of those grades)
« Last Edit: February 06, 2012, 05:33:42 PM by Jason748 »
Logged
CCS/CRA #92
07 CBR600RR - RACE
Sponsors: Two Brothers Honda, Lithium Motorsports, SpyderLeatherworks

"A lot of people go through life doing things badly. Racing’s important to men who do it well. When you’re racing, it... it’s life. Anything that happens before or after... is just waiting."  -S

Wrench87

  • Proud Albertan
  • FREAK Member
  • *****
  • Posts: 1903
  • Karma: +17/-43
    • Facebook
Re: rear res delete update
« Reply #8 on: February 06, 2012, 08:15:22 PM »
Cool, thanks Jason.
Ryan, want to do the same as last time, order two of everything and I'll send some coin your way? :thumb: ;D
Logged

cbrSHAMU

  • ...nom nom nom...
  • FREAK Member
  • *****
  • Posts: 2069
  • Karma: +16/-30
  • Be LIBERATED
Re: rear res delete update
« Reply #9 on: February 06, 2012, 09:44:56 PM »
Make it 3. Been meaning to do this for a while. Only thing, I don't want regular clear..
Logged
2011 CBR600rr Black (Current)
2008 CBR600rr Graffiti (Stolen)

Rjunky

  • FREAK Member
  • *****
  • Posts: 1669
  • Karma: +26/-173
Re: rear res delete update
« Reply #10 on: February 07, 2012, 12:23:39 AM »
yeah we can do that.. i think the only thing we need this time is the tygon.. we have the cap valve and clamps.... sham. the tygon is a clear tube. i think your lookin at the greenish hrc tubing yea?
Logged
this is my signature.....there are many like it....but this one is mine.....

Wrench87

  • Proud Albertan
  • FREAK Member
  • *****
  • Posts: 1903
  • Karma: +17/-43
    • Facebook
Re: rear res delete update
« Reply #11 on: February 07, 2012, 12:51:33 AM »
Yep, I can just cut the old tube off the cap (cus JESUS it's a tight fit lol). Just the tubing
Logged

Rjunky

  • FREAK Member
  • *****
  • Posts: 1669
  • Karma: +26/-173
Re: rear res delete update
« Reply #12 on: February 07, 2012, 12:55:05 AM »
i just forget what size we need lol
Logged
this is my signature.....there are many like it....but this one is mine.....

cbrSHAMU

  • ...nom nom nom...
  • FREAK Member
  • *****
  • Posts: 2069
  • Karma: +16/-30
  • Be LIBERATED
Re: rear res delete update
« Reply #13 on: February 07, 2012, 01:51:14 AM »
Quote from: Rjunky on February 07, 2012, 12:23:39 AM
yeah we can do that.. i think the only thing we need this time is the tygon.. we have the cap valve and clamps.... sham. the tygon is a clear tube. i think your lookin at the greenish hrc tubing yea?
Yes. I can't remember what other colors I seen. But most fresh in my memory is green.
Logged
2011 CBR600rr Black (Current)
2008 CBR600rr Graffiti (Stolen)

Rjunky

  • FREAK Member
  • *****
  • Posts: 1669
  • Karma: +26/-173
Re: rear res delete update
« Reply #14 on: February 07, 2012, 01:58:13 AM »
your gunna pay 15.00 just for that 5inch piece of green lol. i can get 3 feet of this other stuff for like... i htink 8 bucks
the 1000rr valve i got wrench cost more than the tubing
Logged
this is my signature.....there are many like it....but this one is mine.....
Pages: [1] 2
« previous next »