2nd gear clutch wheelies

[jammason]

okay so im having trouble getting it up in second .. although i know its not the bike and its me.. ive seen my mate get it straight to 12 o clock no problem. pointerss pleasee? preferably lettin me kno what speed n rev n throttle i should be usin.. it seems to just spin

[WE_GOT_THAT_TOO]

Warm up your tires first, secondly make sure you do it in a closed parking lot or something. You dont need to be going too fast you can do it at 40, 50, 60 whatever. Rev around 13-14K RPM and dump the clutch. Make sure you have your foot on the rear break in case it comes up too quickly.

[Rjunky]

let some air out of your back tire it will help with the wheel spin

[jammason]

thanks guys !!!! ill let u know how it goess long weekend for me

[jammason]

it just doesnt come out ): dont know what the problem is

[jammason]

UP*

[Mintyrr]

Drop a tooth on the front add on the back help loads

[WE_GOT_THAT_TOO]

Get a new chain and sprocket kit. 8 down 5 up...should do it easily 

[Rjunky]

are you droppin the clutch lol or are you feathering it out?  cuz if your gettin that high up in the rev zone and dropin it i dont know how the hell  your not getting your front tire off the ground.... and stay on the throttle lol dont just get to 8k and pull the clutch and let off the throttle. i cant see you doin it so i dont know what to tell you exept your doin something wrong

[WE_GOT_THAT_TOO]

Ok...Can you do a wheelie in 1st? Not a power wheelie but by droppin the clutch? I'm guessing you can't, but if that's not the case let me know.

[jammason]

Ok...Can you do a wheelie in 1st? Not a power wheelie but by droppin the clutch? I'm guessing you can't, but if that's not the case let me know.

yeah mate i can but the revs run out too quick for me to even try n hit bp :S n a few ppl have told me not to waste my time on 1st.. n the only thing its really good for is to get used to it coming up .. correct me if im wrong n some help plz

[WE_GOT_THAT_TOO]

What I don't understand is how you can do it in first, but struggle so much in second. The key thing is having the concept down. Yes it's a bit more difficult in second until you get used to it, but the concept is the same and you should be able to pull it off. Maybe deep down, you have a fear of looping it and that's preventing you from going with it? 

[jammason]

What I don't understand is how you can do it in first, but struggle so much in second. The key thing is having the concept down. Yes it's a bit more difficult in second until you get used to it, but the concept is the same and you should be able to pull it off. Maybe deep down, you have a fear of looping it and that's preventing you from going with it? 

i dont understand either... n the thing is i actual feel safer doing it in second.. cause i feel it comes up slower.. ( ive only gotten it up like 30cm max off the ground in second) yea i think i just dnt know how to do it properly in second :S

[WE_GOT_THAT_TOO]

OK Here is what you do!!! Measure your balls and when they double in size you hop on the bike and pop that clutch! 

[jammason]

OK Here is what you do!!! Measure your balls and when they double in size you hop on the bike and pop that clutch! 

lol u wanker. show me how its done